TL;DR
-
Resin 3D printing uses liquid resin that can sometimes leak from hollow parts during shipping
-
Clean leaked parts with 90-99% isopropyl alcohol
-
Dry parts on paper towels in sunlight for several hours
-
Contact your seller if leaking continues after cleaning
-
Crypt Monkey Games are always here to help make things right for you!
Resin 3D printing begins with liquid resin, which creates incredibly detailed miniatures and parts. However, because of this liquid foundation, some parts—especially hollow pieces—may retain and later leak liquid resin during shipping or storage. Here at Crypt Monkey Games, we work diligently to prevent this issue, but it can still occur occasionally. This article will guide you through handling resin leaks, whether you've purchased from us or another 3D printer.
Safety First
Before handling any parts with leaked resin, it's important to take proper safety precautions. Always wear disposable gloves when touching uncured resin, as it can cause skin irritation or sensitivity reactions. If you accidentally get resin on your skin, wash your hands immediately with soap and water. Keep the cleaning area well-ventilated and avoid prolonged exposure to resin fumes.
Cleaning Leaked Parts
When you discover resin leakage on your parts, the solution is straightforward: wash them in a pure alcohol solution. The alcohol should be at least 90% concentration, though we recommend 99% isopropyl alcohol for optimal results. The higher the alcohol percentage, the more effectively it will dissolve and remove any uncured resin residue.
Simply submerge the affected parts in the alcohol and gently agitate them to ensure thorough cleaning. You may need to use a soft brush for stubborn areas, but be gentle to avoid damaging fine details. After washing, drain the part thoroughly.
Drying Your Parts
After washing, place the cleaned parts on a stack of paper towels and set them in direct sunlight for several hours to dry completely. Be sure to point the open drain holes of your model towards the sun so that as much light as possible reaches inside. The UV light from the sun will help cure any remaining resin while the paper towels absorb excess moisture and alcohol.
This drying step is also effective for parts that arrive feeling tacky or sticky, even without visible leaks.
When to Seek Additional Help
If your parts continue leaking resin even after following these cleaning steps, don't hesitate to contact us or your original seller for assistance. Please don’t try to glue and/or paint your model before contacting us. Doing so may cause your model to crack open and leak anyway, thus ruining your paint job.
Whenever you have any issues with your items from Crypt Monkey Games, we always want to help make that right for you! We stand behind our products and are committed to ensuring your satisfaction.
Summary
Dealing with resin leaks is manageable with the right approach: clean with high-percentage alcohol, dry in sunlight, and reach out for help if problems persist. These simple steps will get your miniatures ready for painting and gaming in no time.
We hope this guide helps you get the most out of your resin 3D printed parts. Have a great day and happy gaming!